Lesson 5
Time-Domain Analysis: Group Delay, Minimum Phase, ETC, Filtered IR
Use excess group delay, ETC reflections, and filtered IR to judge alignment and EQ feasibility.
What this is for
Time-domain analysis reveals delays, reflections, speaker alignment, and whether a response region can be equalized. It helps you avoid trying to EQ non-minimum phase problems.
Concrete steps
0 of 9 steps completed (0%)
Outputs and interpretation
| Graph | What it tells you |
|---|---|
| Group Delay | Delay vs frequency. |
| Excess Group Delay | Flat regions are minimum phase. |
| ETC | Reflection spikes; time difference × speed of sound = extra path length. |
| Filtered IR | Band-limited impulse, ETC, Schroeder integral. |
| Minimum phase impulse | Lowest-phase version of the response. |
Worked example: Identify a reflection path length
Open Impulse and view ETC with smoothing 0. Find a reflection spike 3.2 ms after the direct sound. Extra path length = 0.0032 s × 343 m/s ≈ 1.1 m. This suggests a reflection from a surface about 0.55 m away from the direct path.
Common mistakes
- Trying to EQ non-minimum phase dips.
- Misreading group delay when a constant time delay is present.
- Not removing delay before interpreting phase.
- Using too high a filter order and adding group delay.
- Ignoring noise floor in decay analysis.
Check your understanding
1. Flat excess group delay indicates:
2. Sharp dips are often:
3. ETC spike time difference × speed of sound = ?