Alignment, Overlays, Averaging, and Trace Arithmetic
Compare measurements, average multiple positions, align subwoofers/mains, and combine traces.
What this is for
These tools let you compare measurements, average multiple positions, combine traces, and align speakers/subs. They are essential for crossover integration, spatial averaging, and correcting measurement data.
Concrete steps
Outputs and interpretation
| Output | What it tells you |
|---|---|
| Overlay graphs | Multiple measurements together. |
| Averaged trace | Representative response. |
| Arithmetic result | Combined or corrected response. |
| Aligned sum | Predicted summed response. |
| IACC | Inter-aural cross correlation. |
Worked example: Sub/main crossover alignment
Place the mic at the listening position. Use a timing reference. Measure the left main speaker alone, the subwoofer alone, and both together. Open All SPL and select the main and sub measurements. Open Alignment Tool. Choose phase or impulse alignment mode. Set the cursor near the crossover frequency, e.g. 80 Hz. Adjust delay, gain, and polarity of the sub. Use Aligned sum to preview the combined response. Check SPL & Phase for a smooth crossover. Apply the delay/polarity settings in the AV processor and re-measure both together.
Common mistakes
- Averaging measurements from different positions without alignment.
- Vector averaging non-aligned measurements.
- Using incompatible sample rates.
- Misusing division and creating huge boosts.
- Forgetting that arithmetic results depend on window settings.